Model No: SOL110-2CI

Automatic volume based, 110Lpm, 50mm connection

The Puretec SOL110-2CI softens water by removing hardness ions (calcium and magnesium) also known as limescale.

Hardness, if uncontrolled, will cause scaling, eventually blocking plumbing and shortening the life of boilers, steam generators, hot water systems and urns, increasing energy use and costs.

The SOL110-2CI achieves long life of the filter bed through regeneration using brine solution which is operated through a fully automatic volumetric control valve.

The SOL110-2CI can also be used to reduce manganese levels, in some cases. Please refer to Puretec for expert advice on your application.

Features & Benefits

• Large capacity resin and brine tank.
• Complete system, just add salt.
• 50mm connections for larger flow rates.
• Weatherproof cover.
• Weatherproof transformer.
• Automatic volume based regeneration for optimised performance and salt use.


Ordering Code:
2CI-Automatic Volume Based
Service Flow Rate:
110 Lpm
Maximum Flow Rate:
150 Lpm
54,000 litres
Inlet / Outlet / Drain Connections:
2” Male BSPT, 1” Drain
Min/Max Operating Pressure:
200 - 600 kPa
Operating Temperature:
5 - 40°C (41 - 104°F)
Power Supply:
230V AC / 50 Hz
1 year^
Replacement Media Kits:
Optional Accessories:
WTV7400 - Microswitch kit for 2CI models.
PTE30 - Hardness test kit.
SS5000 - SoftenerSafe Media, 5 litres.
WTV7500 - Twin alternating valve for 2CI models
WTV7550 - No water bypass during regen valve
Capacities are based on a hardness of 100ppm. The flow rate while the filter backwashes, needs to be equal to the stated service flow to maintain proper backwash functionality, which is critical for optimum performance of filtration systems.

Find a Puretec Dealer